Posts

Showing posts with the label Diorama

Walthers 2021 National Model Railroader's Build Off

So I've decided to take a short detour down the Walther's National Model Railroader's Build Off. Initially I'll post information about the contents of the Individual Class Coal Country kit . I just received most of the kit on 2/9/2021. The track appears to have been shipped in a different package, which seems reasonable since its dimensions are considerably different than the rest of the pieces. The kit cost $100 + shipping. If purchased the pieces individually it would have cost $184.83 the full prices or $173.83 with the sale prices. If you are a part of the Year Master's Club you get the 10% of which brings the price down to $90 + free shipping, seemed like a good deal to me even if I don't win the contest. Package Contents: Walther's Cornerstone - Coal Flood Loader Part # 933-3051 Price: $39.98 (on sale 2/9/2021 for $33.98) https://www.walthers.com/coal-flood-loader-kit-4-x-6-x-11-quot-10-2-x-15-2-x-27-9cm Walther's Cornerstone - Industry Office Part...

HO Scale Atlas Bridge Shoes

Image
Part of the reason for creating the VnBJan2021 Diorama was to figure out to to connect my bridge to the layout. I found the HO Scale Bridge Shoe (Pedestal) by bkpsu on Thingiverse and printed it out but it looked too big, so I decided to use OpenSCAD and started over. One of the reasons that I love OpenSCAD is that if you create it right you can incrementally adjust things until you get them just right without having to manually move lots of little points. Since all values are calculated it is also easy to revert back to a previous version and try a different combination of settings.  I started with the basic upright shape which is a hull of a cylinder and a cube. I adjusted the position so that everything was centered so that it would be easier to position later.  Next I put that in a module with the option to add a nut and remove the center. After that I created three uprights for the base and added base a plate underneath. I chose 0.8mm because it would give me three lay...

VnBJan2021 - Challenge Entry

Image
Here is my entry for the VnBJan2021 diorama challenge. This post will be updates as I make progress on the diorama. Setting: An old abandon railroad that some campers are scoping out the ability to turn it into a Rails to Trails bike path. Materials: Ross Foam board - similar to Adams Readi-board Cardboard scraps from shipping boxes. 3d printed track - straight  & curved Woodland Scenics - Campers - Scenic Accents(R) -- With Tent & Accessories Black and brown acrylic paint. Atlas Arch bridge - Will not fit within the diorama but I want to test how to make the bridge connect to the main track. Final Finished Diorama: <placeholder> Build Log The track was printed with white PLA because it was what was in the printer and it's what I have the most of. Next time I'll probable print with black and then weather with the brown. Comparison of black track with brown weathering.

2021 Diorama Challenge - January

I've starting to finalize my track plan on the Vine & Branches layout, but before I finish up, I would like to make sure that I'm headed the right direction with how I do my scenery so I decided to make a small diorama to test out different techniques and challenge you to do the same and share your creations. Rules:  Must be realistic in nature.  Base dimensions less than 12x12. Inexpensive - As this is a test area for different techniques expenses need to be kept to a minimum as it will probably get either thrown away or given away. Post your entries with the hash tag #VnBJan2021 Contain: Some mountain/hill terrain with a rock face. Has a spot to connect the track to an Atlas bridge such as the  Through Truss Bridge . Some trees. Leave a comment here with a link to your post on Instrgram, Twitter, or whatever platform or forum you chose to post your entry on. Make sure to post your comment linking to your entry before January 31, 2021 as comments will be disabled aft...